CNC products from AxeMotion

AxeMotion Products

PulseBox

uPulseMaker

- Highly integrated CNC device with USB interface
- USB powered
- Up to 4 axes, with fast interpolation on 2, 3 or 4 axes simultaneously
- Advanced kinematics possibilities
- 25 KHz maximum output frequency (124 mm/s with 5 mm screw and 800 microsteps/rev)
- Look-ahead buffer (250 vectors)
- Freely assignable clock/direction signals on the D0-D7 pins of the DB25 connector
- 1 freely assignable PWM output
- 5 inputs / 4 outputs on the DB25 connector
- Extra 5 inputs / 3 outputs on the top of the box
- Compatible with GALAAD

Advantages of the PulseBox :

Leading-edge technology CNC device in a very small box. Contains the same high-performance firmware as its sisters.
All signals (Clock, Direction, PWM, I/Os) are freely assignable to the DB25 pins from the application software
Compatible with all existing power cards that can be driven from a parallel port
Very simple and efficient solution to renew your old-fashioned machine that require parallel port driving
High level of performance due to its powerful interpolator (4 axes simultaneously), its frequency (25 KHz) and its wide buffer (250 vectors)
Compatible with Galaad, the professional CAC/CAM/CNC solution
Attractive price

Our CNC Software is now delivered with all our cards See the Software Section

PulseBox Datasheet

Price (LANCELOT Licence included) : 240 Euors
Availability : Immediate
Price PulseBox + Galaad Hobby : 480 Euros

PulseMaker

PulseMaker Screw terminal Block Version HE10 Version

- Standard CNC device with USB interface
- USB powered
- Up to 4 axes, with fast interpolation on 2, 3 or 4 axes simultaneously
- Advanced kinematics possibilities
- 35 KHz maximum output frequency (124 mm/s with 5 mm screw and 800 microsteps/rev)
- Look-ahead buffer (250 vectors)
- 12 inputs / 6 outputs / 1 PWM + analog output
- 1 analog input
- One relay
- One analog 0-10V output
- Available in two versions : Screw terminal block or HE10 connectors
- Compatible with GALAAD

Advantages of the PulseMaker:

Leading-edge technology CNC card
Easy to integrate in a standard machine that uses clock + direction signals
Very simple and efficient solution to renew your old-fashioned machine
High level of performance due to its powerful interpolator (4 axes simultaneously), its frequency (35 KHz) and its wide buffer (250 vectors)
Compatible with Galaad, the professional CAC/CAM/CNC solution
Attractive price

Our CNC Software is now delivered with all our cards See the Software Section

PulseMaker Datasheet

Price (LANCELOT Licence Included) : 270 Euros
Availability: Immediate
Price PulseMaker + Galaad Hobby : 510 Euros

PowerStep

CN4Axis PowerStep with 3 MicroStep25 power cards

CN4Axis PowerStep, connector side

PowerStep

- Standard CNC motherboard with USB interface
- USB powered
- Up to 4 axes, with fast interpolation on 2, 3 or 4 axes simultaneously
- Advanced kinematics possibilities
- 35 KHz maximum output frequency (124 mm/s with 5 mm screw and 800 microsteps/rev)
- Look-ahead buffer (250 vectors)
- 12 inputs / 6 outputs / 1 PWM + analog output
- 1 analog input
- Accept up to 4 stepper power cards
- One relay
- One analog 0-10V output
- Compatible with GALAAD

MicroStep25 Power Cards

- Independant power card that can be plugged on the owerStep motherboard
- DIP-switches for current setup, from 0.8A to 2.5A / phase
- DIP-switch for microstep setup, 1/1, 1/2, 1/4 or 1/8 step
- Fully optoisolated from the motherboard
- Automatic current reduction (60% cut) after 1 s of motor inactivity

CN4Axis PowerStep with a 4th MicroStep25 power card

Advantages of the PowerStep:

Leading-edge technology CNC card
Compact solution for a whole CNC + power stage set
Minimum wiring (connect the power supply, connect the motors and plug the USB cable)
MicroStep25 cards are a safe solution (entirely optoisolated), performing (1/8th microstep), flexible (settable current) and avoiding motor overheating when inactive
High level of performance due to its powerful interpolator (4 axes simultaneously), its frequency (35 KHz) and its wide buffer (250 vectors)
Compatible with Galaad, the professional CAC/CAM/CNC solution
Attractive price

Price PowerStep + 3 x uStep25 (LANCELOT Licence included) : 390 Euros
Availability: Immediate
Price PowerStep + 3 x uStep25 + Galaad Hobby : 630 Euros

Coming soon

- 6A power cards for the PowerStep

Info

- Availability of the new range of CNC cards: Immediate

- Our CNC Sotware is now available and delivered with all our cards ! Click Here

Payment

Partner

Galaad